Man taking care and cleaning his car

Quick exterior can make your car look like new.

Cost-conscious consumers armed with a bucket and garden hose can a fine detail job themselves for a fraction of the cost. Here’s a look at the best ways to keep the outside of your car looking new:

• Quick-fix chips, nicks. To prevent rusting, fix small scratches and chips as soon as possible. Most new-car dealers sell small bottles of touch-up paint to match recent models’ finishes for a few dollars. Clean the damaged area and apply the paint sparingly with the brush provided.

• Location, location, location. Always wash and wax your car in a shaded area. This will both prevent water spotting and keep the wax from drying too quickly and baking onto the car’s surface (sun-hardened wax is especially difficult to remove).

• Ragtime. Be sure to use a soft rag – either terrycloth or flannel – when washing or waxing your vehicle. Nylon or synthetic towels or paper products are not as absorbent and may scratch the finish.

• Take a top-to-bottom approach. Work your way from the top down, using an acid-free non-abrasive cleaner to wash the vehicle’s exterior; this is available at auto-parts stores and most discount stores. Use a wheel-and-tire cleaning treatment and/or scrub wheels and tires using a stiff bristle brush to remove dirt, grease and disc-brake powder. Use a treatment made for removing insects and road tar to clean the front grille (take extra care if your grille is made of plastic), behind the wheels and other problem areas.

• Spraying from top to bottom, rinse the vehicle by letting an adequate supply of water stream down the finish. Be sure to spray thoroughly underneath the car and inside the wheel wells to loosen road grime. This is especially important during the winter months in snow-belt areas, when corrosive road salt can accumulate. Allow the car’s surface to dry, raising the hood and trunk to allow the water to run completely from the edges. Especially if you won’t be waxing the car that day, remove water beads using an absorbent chamois – again, available where auto supplies are sold.

• Apply a good coat of wax to the car’s sheet metal, but be sure to choose a wax that’s “right” for your vehicle. For example, if you have an older car, you may want to choose a wax that has a light abrasive to remove minor scratches. A newer car may require a milder polish made for so-called clear-coat paint finishes. Typically, car wax or cleaner/wax is applied with a clean, damp cellulose sponge with overlapping, circular strokes to a cool finish (to avoid streaks). Once the wax has dried to a haze, wipe it off with a soft, clean cloth.

• Treat tires and exterior rubber or plastic trim with the aforementioned plastic/rubber protectant. Use a chrome treatment to polish exterior brightwork and aluminum wheels; a household window-cleaner can suffice, but apply it with a rag, to avoid spraying an ammonia-based product onto the freshly waxed paint.

© CTW Features

We're improving out commenting experience.

We’ve temporarily removed comments from articles while we work on a new and better commenting experience. In the meantime, subscribers are encouraged to join the conversation at our Post and Courier Subscribers group on Facebook.