Q: Iím having trouble roasting chicken. Either I overcook the breast meat or the thigh joints stay bloody. Should I use high heat or low heat? And what about the roasting pan; should I use a rack?
A: I could write a whole story breaking down all the finer points of roast chicken. But here are a few things to consider:
First, I start chickens in a hot oven, around 425 degrees, for 15 minutes, then reduce the heat to 325 degrees. That blast of heat crisps the skin and starts the cooking, while the lower heat keeps the chicken from drying out while it finishes cooking.
Instead of a roasting pan and rack, try a smaller cooking vessel. In a big pan, the juices spread out and evaporate. A smaller container cups the chicken, keeping the juices inside, where they help the chicken cook and keep it from drying out.
Notice how youíre placing the chicken in the oven. The back of the oven usually is hotter than the front. So put the chicken in with the dark-meat areas ó the legs and thighs ó pointing toward the back so they get hotter.
Finally, donít forget the standing time. Use an instant-read thermometer in the thickest part of the thigh to make sure the chicken has reached 165 degrees. Then remove the chicken from the oven and let it stand 10 or 15 minutes before you carve it. The temperature will rise 5 to 10 degrees and the juices will settle back down into the meat rather than running out onto the platter.
Notice about comments:
The Post and Courier is pleased to offer readers the enhanced ability to comment on stories. Some of the comments may be reprinted elsewhere in the site or in the newspaper. We ask that you refrain from profanity, hate speech, personal comments and remarks that are off point.