WASHINGTON — It may start with a couple of small dark spots on the grout where the shower stall meets the tiled wall. A few days later, they multiply. Mildew.
“For most people it’s just kind of an ugly pain. Their bathroom gets these black stains,” said Ken Collier, editor-in-chief of The Family Handyman.
For others, though, “it’s an allergen, like cat hair, dog hair,” he said. If it’s not removed, it can result in respiratory problems or other allergy symptoms, according to the Centers for Disease Control and Prevention.
Mold and mildew, which the Federal Emergency Management Agency calls “mold in early stage,” can grow on a wide range of surfaces as long as moisture is present, and they can give your house a musty smell.
“It’s an indication of dampness, like in bathrooms that are not ventilated very well,” said Kathie Birenbaum, who works at Strosniders Hardware Store in Bethesda, Md.
“Molds can gradually destroy the things they grow on,” the Environmental Protection Agency says in a pamphlet on its website. “You can prevent damage to your home and furnishings, save money and avoid potential health problems by controlling moisture and eliminating mold growth.”
It’s important to both control the moisture and clean up the mold to keep it from growing back, the EPA says.
Cleaning large areas, more than 10 square feet, the EPA says, might require a contractor trained in mold removal. For smaller areas, it can be a do-it-yourself job.
Frequently, the bathroom is the first place that a homeowner or apartment dweller might notice mildew.
“A lot of people take a shower, get out of the shower” and go on their way, Collier said. “Basically, they’ve left all this water on the walls and floor of the shower and surprise, surprise, the bathroom is damp and you find mildew growing on the grout.”
Often, condensation, not a leak, is the source of the moisture, Collier said.
“The bathroom fan is a big part of keeping the moisture level down in the bathroom,” he said.
“If there isn’t one, put one in. If there’s a small one, put in a bigger one or use it more.”
Opening the bathroom window also helps, as does more frequent cleaning, according to the EPA.
Collier also suggests using a squeegee to wipe down the shower walls.
There are many products available for cleaning mildew and mold, but homeowners also can mix their own. A bleach solution that CDC says should be “no more than 1 cup of bleach in 1 gallon of water” can be used to clean and kill mildew.
“For the typical homeowner, they would scrub it down really well with bleach water and then they should seal the grout, seal it once a year or so to keep it water tight,” Collier said.
Wear protective gloves while cleaning. The CDC also recommends protective eyewear.
If you can’t get rid of the mildew with bleach, you might have to dig out the grout and replace it, Collier said.
For those looking for an environmentally friendlier alternative to bleach, Collier said one of the products that mold experts recommend is Concrobium, which also can be used as a fog if a whole room is affected.
It’s not just bathrooms where you’ll find mold or mildew.
“Sometimes people find it in closets where there’s limited air circulation, and where maybe there’s a cool wall and it’s humid,” Collier said.
Or there could be condensation around heating ducts, and you’ll find a moldy patch on the ceiling. Moisture from roof leaks also can lead to growth of mold and mildew.
If you paint over mildew, the paint likely will peel. Birenbaum says there special primers that inhibit mold growth.
Mold forms on a ceiling under a duct in a studio. Warm, moist air condenses and forms water on ducts carrying cold air through the attic or crawl space. The condensation is a sign that the duct is not insulated or missing a vapor barrier. Eventually, the water saturates the insulation and drywall and mold spores take root.×